Toshiba e-STUDIO281c Service Manual page 229

[A-12] Bypass separation roller
(1) Take off the bypass unit (
Bypass unit").
(2) Remove 3 screws and take off the lower
plate.
(3) Take off the bypass separation roller assem-
bly.
(4) Detach the cover, the arbor, and the clutch
spring from the shaft, and then take off the
bypass separation roller.
June 2005 © TOSHIBA TEC
P.10-9 "[A-1]
Lower plate
Bypass separation roller assembly
10 - 17
Fig.10-30
Fig.10-31
Shaft
Cover
Bypass separation roller
Fig.10-32
e-STUDIO281c/351c/451c PAPER FEEDING SYSTEM
Arbor
Clutch spring
10