Toshiba e-STUDIO281c Service Manual page 118

(C) Misfeed in equipment
• Exit sensor (S40) detects jamming of the leading edge of paper
Registration clutch turned ON
Approx 1.2 sec.
Exit sensor (S40) turned ON
If the exit sensor (S40) is not turned ON after
approx 1.2 seconds,
Paper jam (E010)
is stopped.
• Exit sensor detects jamming of the trailing edge of paper
Registration clutch (CLT12) turned OFF
Approx 1.3 sec.
Exit sensor (S40) turned OFF
If the exit sensor (S40) is not turned OFF after
approx 1.3 seconds,
Paper jam (E020)
is stopped.
• Immediately after the power ON
Any of all sensors on paper transport path detects paper (ON)
Paper jam (E030)
• Front cover is opened during copying
Paper jam (E410)
• Registration sensor (S22) detects jamming of the leading edge of paper:
The registration sensor (S22) is not turned ON in a fixed period of time after the leading edge of
paper passed the transport roller.
Paper jam (E120, E200, E210, E300, E330 and E3C0)
e-STUDIO281c/351c/451c GENERAL OPERATION
The copying operation
The copying operation
4 - 12
Registration clutch
Exit sensor
Timer
Fig.4-1
Registration clutch
Exit sensor
Timer
Fig.4-2
ON
ON
0 Approx 1.2 sec.
Paper jam ( E010 )
OFF
ON
Approx 1.3 sec.
Paper jam ( E020 )
June 2005 © TOSHIBA TEC