Accessing The Network Se Menu; Service Engineer Menu; Accessing The Service Engineer (Se) Menu; Service Engineer (Se) Menu - Lexmark MS510 Service Manual

Accessing the Network SE menu

This menu contains settings for fine tuning the communication settings for the network interfaces and protocols.
1
Navigate to:
Networks/Ports > Standard Network > Std Network Setup.
2
Press and hold 6, 7, and 9 simultaneously.

Service Engineer menu

Accessing the service engineer (SE) menu

From a Web browser on a host PC, add /se to the printer IP address.

Service engineer (SE) menu

This menu should be used as directed by the next level of support.
Top level menu
Print SE Menus
General
Code Revision Info
History
MAC
NVRAM
TCP/IP
Intermediate menu
Copyright — Displays copyright information
• Network code level — Displays network code level
• Network Compile Info — Displays network compile information
• Printer Code Level — Displays printer code information
•
Printer Compile Info — Displays compile information
•
Print History
•
Mark History
•
History Mode
•
Set Card Speed
•
LAA
•
Keep Alive
• Dump NVRAM
• Reinit NVRAM
•
netstat‑r
• arp‑a
• Allow SNMP Set
• MTU
• Meditech Mode
• RAW LPR Mode
• Gather Debug
• Enable Debug
Service menus
4514-630, -635, -636, -638, -639, -649
146