5
Remove the six screws (D) securing the nameplate.
Control panel assembly removals
Control panel assembly removal (MS510dn and MS610dn)
1
Remove the right cover. See
2
Remove the nameplate. See
3
Remove the bezel. See
4
Remove the screw (A) securing the ground connector to the controller board.
"Right cover removal" on page
"Nameplate removals" on page
"Bezel removals" on page
Repair information
D
179.
201.
199.
A
203
4514-630, -635, -636, -638, -639, -649