Change [Paper Source] To [Custom String] Load [Paper Orientation]; Change [Paper Source] To [Paper Size] Load [Orientation]; Change [Paper Source] To [Paper Type] [Paper Size] Load [Orientation]; Close Front Door - Lexmark MS510 Service Manual

Change [paper source] to [custom string] load [paper orientation]

Try one or more of the following:
•
Load the correct size and type of paper in the tray, then verify that the paper size and type settings are specified in
the Paper menu on the printer control panel, and then select Finished changing paper. For non‑touch‑screen printer
models, press to confirm.
•
Cancel the print job.

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:
•
Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper
menu on the printer control panel, and then select Finished changing paper. For non‑touch‑screen printer models,
press to confirm.
•
Cancel the print job.

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:
•
Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper
menu on the printer control panel, and then select Finished changing paper. For non‑touch‑screen printer models,
press to confirm.
•
Cancel the print job.

Close front door

Close the front door of the printer.

Complex page, some data may not have printed [39]

Try one or more of the following:
•
From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen
printer models, press
• Cancel the current print job. For non‑touch‑screen printer models, press
•
Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:
•
The printer firmware has been updated.
• The tray for the print job is removed.
to confirm.
Diagnostic information
4514-630, -635, -636, -638, -639, -649
to confirm.
71