Load Manual Feeder With [Paper Type] [Paper Size] [Paper Orientation]; Maintenance Kit Low [80.Xy]; Maintenance Kit Nearly Low [80.Xy]; Maintenance Kit Very Low, [X] Estimated Pages Remain [80.Xy] - Lexmark MS510 Service Manual

Load manual feeder with [paper type] [paper size] [paper orientation]

Try one or more of the following:
•
Load the multipurpose feeder with the correct size and type of paper.
•
Depending on your printer model, touch Continue or press
Note: If no paper is loaded in the feeder when Continue or
the request, and then prints from an automatically selected tray.
•
Cancel the current job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, contact customer support at
http://support.lexmark.com
continue printing. For non‑touch‑screen printer models, press

Maintenance kit nearly low [80.xy]

For more information, contact customer support at
necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,
press to confirm.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at
http://support.lexmark.com
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press

Memory full [38]

Try one or more of the following:
• From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer models, press
to confirm.
•
Install additional printer memory.

Network [x] software error [54]

Try one or more of the following:
• From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press
to confirm.
• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
or your service representative. If necessary, select Continue to clear the message and
http://support.lexmark.com
or your service representative.
to confirm.
Diagnostic information
4514-630, -635, -636, -638, -639, -649
to clear the message and continue printing.
is selected, then the printer manually overrides
to confirm.
or your service representative. If
76