Key Repeat Rate; Clear Supply Usage History; Clear Custom Status; Usb Speed - Lexmark MS510 Service Manual

Key Repeat Rate

Note: This setting is available on the MS610de model only.
This setting indicates the number of presses per second for repeating keys. The range is 0.5–100, with increments of
0.5. The default setting is 15 presses per second.
To adjust this setting:
1
From the Configuration menu, navigate to Key Repeat Rate.
2
Touch the arrow keys to adjust the setting.
3
Touch to save the setting, or press X to return to the Configuration menu without saving any changes.

Clear Supply Usage History

This setting reverts the supply usage history (number of pages and days remaining) to the factory shipped level.
To clear the supply usage history:
1
From the Configuration menu, navigate to Clear Supply Usage History.
2
Depending on the printer model, press OK or touch Clear Supply Usage History to proceed.

Clear Custom Status

Executing this operation erases any strings that have been defined by the user for the default or alternate custom
messages.
To clear the custom status:
1
From the Configuration menu, navigate to Clear Custom Status.
2
Depending on the printer model, press OK or touch Clear Custom Status to proceed.

USB Speed

This setting is used to set the throughput of the USB port on the printer.
Available options:
•
Auto
• Full—Forces the USB port to run at full speed and also disables its high‑speed capabilities.

Automatically Display Error Screens

If On, the panel automatically displays any existing printer-related IR after the printer remains inactive on the home
screen for a length of time equal to the Screen timeout setting in the Timeouts section of the General settings menu.
Any IR that appears on the display will give the user the option of returning to the home screen without clearing it.
From the home screen, any other workflow or feature can be initiated as usual. Once the printer returns to the home
screen, any existing IR will again appear after the printer remains inactive for a length of time equal to the Screen
timeout setting.
Service menus
144
4514-630, -635, -636, -638, -639, -649