Lexmark MS510 Service Manual page 114

Actions
Step 5
Does the IP address displayed on the network settngs page match the IP
address in the port of the drivers using the printer?
Step 6
Does the LAN use DHCP?
Note: A printer should use a static IP address on a network.
Step 7
Are the first two segments of the IP address 169.254
Step 8
POR the printer.
Did this resolve the issue?
Step 9
Reset the address on the printer to match the IP address on the driver.
Did this resolve the issue?
Step 10
Have the network admin verify that the printer and PC's IP address have
identical subnet addresses.
Are the subnet addresses the same?
Step 11
Using the subnet address supplied by the network administrator, assign
a unique IP address to the printer.
Note: The printer IP address should match the IP address on the printer
driver.
Did this fix the problem?
Step 12
Is the device physically connected (Ethernet cable) to the network?
Step 13
Try using a different Ethernet cable.
Did this fix the problem?
Step 14
Have the network administrator check the network drop for activity.
Is the network drop functioning properly?
Step 15
Is the printer on the same wireless network as the other devices?
Yes
Go to step 10.
Go to step 7.
Go to step 8.
The problem is solved. Go to step 10.
The problem is solved. Go to step 10.
Go to step 12.
The problem is solved. Go to step 12.
Go to step 13.
The problem is solved. Go to step 14.
Replace the controller
board. See
board removals" on
page
Go to step 17.
Diagnostic information
114
4514-630, -635, -636, -638, -639, -649
No
Go to step 6.
Go to step 9.
Go to step 9.
Go to step 11.
Go to step 15.
Contact the network
"Controller administrator.
185.
Go to step 16.