Understanding The Colors Of The Indicator And Sleep Button Lights - Lexmark MS510 Service Manual

Use the
1 Display
2 Home button
3 Keypad
4 Sleep button
5 Stop or cancel button Stop all printer activities.
6 Indicator light
7 USB port

Understanding the colors of the indicator and Sleep button lights

The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light
Off
Blinking green
Solid green
Blinking red
Sleep button light color and its corresponding printer status
Sleep button light
Off
Solid amber
Blinking amber
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in pulsing
pattern
To
View the printer status and messages.
Set up and operate the printer.
Go to the home screen.
Enter numbers, letters, or symbols.
Enable Sleep mode or Hibernate mode.
The following actions wake the printer from Sleep mode:
•
Touching the screen
• Pressing any hard button
• Opening a tray or the front door
• Sending a print job from the computer
• Performing a power‑on reset using the main power switch
• Attaching a device to a USB port
Check the status of the printer.
Connect a USB Bluetooth adapter or a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Printer status
The printer is off or in Hibernate mode.
The printer is warming up, processing data, or printing.
The printer is on, but idle.
The printer requires user intervention.
Printer status
The printer is idle or in Ready state.
The printer is in Sleep mode.
The printer is waking from or entering Hibernate mode.
The printer is in Hibernate mode.
Service menus
4514-630, -635, -636, -638, -639, -649
119