User Attendance Messages (0-99.99) - Lexmark MS510 Service Manual

Hide thumbs Also See for MS510:
Table of Contents

Advertisement

User attendance messages (0–99.99)
User attendance messages (0‑99.99)
User attendance messages
Error code
Description
31.21
Capactive Toner Level Sensing (CTLS) reading out of
range.
31.22
Excessive CTLS noise.
31.23
Abrupt change detected in CTLS reading.
31.25
CTLS calibration capacitor reading is too low
31.40
Toner cartridge smart chip error
31.41
Toner cartridge I2C packet timeout
31.42
Toner cartridge I2C packet has been sent but code
timed-out on receiving the data (callback)
31.43
Toner cartridge security error in the send challenge
sequence
31.44
Toner cartridge ROM signature error
31.45
Toner cartridge stuck busy (Status register and/or CRI
Arbiter register report busy)
31.46
Toner failed to replenish into the imaging unit
31.60
Imaging unit smart chip error
31.61
Imaging unit I2C packet timeout
31.62
Imaging unit I2C packet has been sent but code timed-
out on receiving the data (callback)
31.63
Imaging unit security error in the send challenge
sequence
31.64
Imaging unit ROM signature error
31.65
Imaging unit stuck busy (status register and/or CRI
Arbiter register report busy)
31.66
Toner failed to replenish into the imaging unit
Action
Go to
"CTLS service check" on page
1
Make sure that the toner cartridge is properly
installed.
2
Check if the toner cartridge is supported. Replace
with a supported toner cartridge if necessary.
3
If the problem remains, go to
smart chip contact service check" on page
1
Make sure that the toner cartridge is properly
installed.
2
Check if the toner cartridge is supported. Replace
with a supported toner cartridge if necessary.
3
If the problem remains, go to
service check" on page
1
Make sure that the imaging unit is properly
installed.
2
Check if the imaging unit is supported. Replace
with a supported imaging unit if necessary.
3
If the problem remains, go to
chip contact service check" on page
1
Make sure that the toner cartridge is properly
installed.
2
Check if the toner cartridge is supported. Replace
with a supported toner cartridge if necessary.
3
If the problem remains, go to
service check" on page
Diagnostic information
82
4514-630, -635, -636, -638, -639, -649
93.
"Toner cartridge
"Cartridge gearbox
94.
"Imaging unit smart
"Cartridge gearbox
94.
84.
85.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms610M1145M3150

Table of Contents