Assembly - Exerpeutic 1115 Owner's Manual

ASSEMBLY

Tool:
35 35 35 35
36 36 36 36
Multi Hex Tool with Phillips Screwdriver
78 78 78 78
S10, S13, S14, S15
73 73 73 73
37 37 37 37
1. Front Stabilizer Installation
Lift up the Front Main Frame (73) towards the front, and then align the Front Stabilizer (78)
onto the front curve of the Front Main Frame (73). Attach two Bolts (37) and on the other
ends of bolts with two Big Curve Washers (36) and two Cap Nuts (35). Hold the Front
Stabilizer (78) to the Front Main Frame (73) and use the Multi Hex Tool with Phillips
Screwdriver to tighten the Cap Nuts (35) until firm and secure.
Hardware:
(#35) Cap Nut
(#36) Big Curve Washer (#37) Bolt
2 PCS
2 PCS 2 PCS
9