Exerpeutic 1115 Owner's Manual page 16

ASSEMBLY
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
7. Left and Right Foot Pedals Installation
The Cranks, Pedal Shafts, and Foot Pedals are marked "R" for Right and "L" for Left.
Insert the pedal shaft of Left Foot Pedal (63) into threaded hole in the left Crank (62). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (63) with the Multi Hex Tool with Phillips
Screwdriver provided. Insert pedal shaft of Right Foot Pedal (61) into threaded hole in right
Crank (62). Turn the pedal shaft by hand in the clockwise direction until snug. Tighten
pedal shaft of Right Foot Pedal (61) with the Multi Hex Tool with Phillips Screwdriver
provided.
15