ASSEMBLY
5
Tool:
12 12
11 11
10 10
13 13
9
6
Allen Wrench 5mm
13 13
6
4
3
2
29 29
17 17
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
8.
Left/Right Handrails and Backrest Installation
Align and hold the Left Handrail (4) and Backrest (5) onto the Back and Seat Support
Bracket (17), use 5mm Allen Wrench to tighten four Bolts (2) and four Washers (3) until
firm and secure.
Connect the Hand Pulse Sensor Wire (6) from the Left Handrail (4) to the Extension Hand
Pulse Sensor Wire (13) from the Right Handrail (12).
Insert the Right Handrail (12) into the tube hole of the Left Handrail (4) and secure with two
Bolts (9), two Big Curve Washer (10), and two Cap Nuts (11). Tighten cap nuts with Multi
Hex Tool with Phillips Screwdriver provided.
Connect the Extension Hand Pulse Sensor Wire I (29) to the Hand Pulse Sensor Wire (6)
and Extension Hand Pulse Sensor Wire (13).
Hardware:
(#3) Washer
(#9) Bolt
(#10) Big Curve Washer
(#2) Bolt
4 PCS
2 PCS
2 PCS
4 PCS
(#11) Cap Nut
2 PCS
16