Exerpeutic 1115 Owner's Manual page 12

ASSEMBLY
Tool:
Allen Wrench 6mm
39 39 39 39
26 26 26 26
40 40 40 40
40 40 40 40 29 29 29 29 55 55 55 55
40 40 40 40
39 39 39 39
39 39 39 39
73 73 73 73
3. Rear Main Frame Installation
Use 6mm Allen Wrench to remove six Bolts (39) and six Washers (40) from the Rear Main
Frame (26).
Connect the Extension Hand Pulse Sensor Wire I (29) from the Rear Main Frame (26) with
the Extension Hand Pulse Sensor Wire II (55) from the Front Main Frame (73). Insert the
Rear Main Frame (26) into Front Main Frame (73). Make sure the wires stay connected.
Tighten the six Bolts (39) and six Washers (40) by 6mm Allen Wrench.
11