Assembly; Main Frame ( - Exerpeutic 975XBT Owner's Manual

STEP 1
1a. Insert the Cup Holder (53) into the Main Frame (1). See Figure A.
1b. Front Stabilizer Installation: Lift up the front of the Main Frame (1), and attach the Front
Stabilizer (7) onto the front curve of the Main Frame (1) with two Carriage Bolts (9), two Curve
Washers (10), two Spring Washers (12), and two Cap Nuts (11). Use the Multi Hex Tool with
Phillips Screwdriver to tighten the Cap Nuts (11) until they are firm and secure.
1c. Rear Stabilizer Installation: Lift up the rear of the Main Frame (1), and attach the Rear
Stabilizer (3) onto the rear curve of the Main Frame (1) with two Carriage Bolts (9), two Curve
Washers (10), two Spring Washers (12), and two Cap Nuts (11). Use the Multi Hex Tool with
Phillips Screwdriver to tighten the Cap Nuts (11) until they are firm and secure.
(9) Carriage Bolt
4 PCS

ASSEMBLY

HARDWARE PACK
(10) Curved Washer
4PCS
11
TOOL
Multi Hex Tool with Phillips
Screwdriver
(11) Cap Nut
(12) Spring Washer
4PCS
1PC
4PCS