Exerpeutic 1115 Owner's Manual page 19

ASSEMBLY
43 43
50 50
20
44 44
4
Tool:
45 45
23
47 47
46 46
21
48 48
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
10. Computer and Bottle Holder Installation
Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts (45) from the
Computer (43).
Connect the Extension Hand Pulse Sensor Wires III (44) and Extension Sensor Wire I
(50) to the wires that come from the Computer (43). Tuck wires into the Front Post (48).
Attach the Computer (43) onto the top end of the Front Post (48) with four Bolts (45) that
were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Use the Multi Hex Tool with Phillips Screwdriver to remove two Bolts (46) from the Front
Post (48).
Attach the Bottle Holder (47) onto the Front Post (48) with two Bolts (46) that were
removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
18