Exerpeutic 1115 Owner's Manual page 13

ASSEMBLY
Tool:
16 16
23 23
24 24
24 24
Multi Hex Tool with Phillips Screwdriver
21 21
S10, S13, S14, S15
17 17
18 18
19 19
Allen Wrench 5mm
4. Seat and Right/Left Handrail Support Tubes Installation
Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts (24) from the Back and
Seat Support Bracket (17).
Align and hold the Right Handrail Support Tube (21) onto the Back and Seat Support
Bracket (17), use the Multi Hex Tool with Phillips Screwdriver to tighten the Bolts (24) until
firm and secure.
Repeat the same assembly steps to the Left Handrail Support Tube (23).
Align and hold the Seat (16) onto the Back and Seat Support Bracket (17), use 5mm Allen
Wrench to tighten four Big Washers (18) and four Bolts (19) until firm and secure.
Hardware:
(#18) Big Washer (#19) Bolt
4 PCS 4 PCS
12