Approved Cleaning Agents; Cleaning The Imager - Motorola DS4800 Series Product Reference Manual

12 - 2 DS4800 Series Corded Digital Imager Product Reference Guide

Approved Cleaning Agents

The following cleaning agents are approved for cleaning the plastics on Motorola scanners:
•
Pre-moistened wipes
•
Isopropyl alcohol 70%

Cleaning the Imager

Routinely cleaning the exit window is required. A dirty window can affect scanning accuracy. Do not allow any
abrasive material to touch the window.
To clean the imager:
Dampen a soft cloth with one of the approved cleaning agents listed above or use pre-moistened wipes.
1.
Gently wipe all surfaces, including the front, back, sides, top and bottom. Never apply liquid directly to the
2.
imager. Be careful not to let liquid pool around the imager window, trigger, cable connector or any other
area on the device.
Do not spray water or other cleaning liquids directly into the exit window.
3.
Wipe the imager exit window with a lens tissue or other material suitable for cleaning optical material such
4.
as eyeglasses.
Immediately dry the imager after cleaning with a soft non-abrasive cloth to prevent streaking.
5.
Allow the unit to air dry before use.
6.