Errors While Scanning; Symbology Parameter Defaults - Motorola DS4800 Series Product Reference Manual

6 - 2 DS4800 Series Corded Digital Imager Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 6-1 lists the defaults for all symbology parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, see
NOTE See
parameters.
Symbology Parameter Defaults
Table 6-1
Enable/Disable All Code Types
1D Symbologies
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
Decode UPC/EAN/JAN Supplemental AIM ID
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Transmit UPC-E1 Check Digit
UPC-A Preamble
UPC-E Preamble
UPC-E1 Preamble
Default Parameters on page
Appendix A, Standard Default Parameters
Parameter
4-5.
for all user preferences, hosts, and miscellaneous default
Parameter
Number
1 Enable
2 Enable
12 Disable
4 Enable
3 Enable
83 Disable
16 Ignore
000
579
580
80 10
672 Combined
40 Enable
41 Enable
42 Enable
34 System Character
35 System Character
36 System Character
Page
Default
Number
6-7
6-8
6-8
6-9
6-9
6-10
6-10
6-12
6-14
6-14
6-15
6-16
6-16
6-17
6-18
6-18
6-20