Code 93; Enable/Disable Code 93 - Motorola DS4800 Series Product Reference Manual

Code 93

Enable/Disable Code 93

Parameter # 9
To enable or disable Code 93, scan the appropriate bar code below.
*
Enable Code 93
Set Lengths for Code 93
Parameter # 26, 27
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within
a specific range. The default is 1 to 55.
•
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length.
Select the length using the numeric bar codes in
decode only Code 93 symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1
followed by 4. To correct an error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Code 93 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Code 93 symbols containing either 2 or 14 characters, select Code 93 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection,
scan Cancel on page
•
Length Within Range - Select this option to decode a Code 93 symbol with a specific length
range. Select lengths using the numeric bar codes in
to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 - Length
Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an
error or change the selection, scan
•
Any Length - Scan this option to decode Code 93 symbols containing any number of characters within
the imager's capability.
(1)
G-2.
Cancel on page
Disable Code 93
(0)
Appendix G, Numeric Bar
Cancel on page
Appendix G, Numeric Bar
Appendix G, Numeric Bar Codes.
G-2.
Symbologies 6 - 37
Codes. For example, to
G-2.
Codes. For
For example,