Parsing Driver's License Data Fields (Embedded Driver's License Parsing); Embedded Driver's License Parsing Criteria - Code Type - Motorola DS4800 Series Product Reference Manual

Parsing Driver's License Data Fields (Embedded Driver's License Parsing)

To begin programming a parsing rule:
Scan Begin New Driver's License Parse Rule on page
1.
Scan any of the field bar codes on the following pages, or
2.
Keyboard Characters) on page 9-20
After entering the entire rule, scan
3.
NOTE Only ONE driver's license parsing rule may be stored in memory at any time. Saving a new rule replaces
the prior rule.
To abort the programming sequence at any time during programming, scan
on page 9-4. Any previously saved rule is retained.
To erase a programmed saved rule, scan

Embedded Driver's License Parsing Criteria - Code Type

After specifying the fields and their order for the parsed driver's license, you can also apply standard ADF rules
to the parsed data using the
Programmer Guide.
NOTE Only create standard ADF rules on parsed driver's license data when configured for Embedded Driver's
License Parsing.
See Embedded Driver's License Parsing ADF Example on page 9-44
type criterion.
to complete the parsing rule.
Save Driver's License Parse Rule on page 9-4
Erase Driver's License Parse Rules on page
criterion bar code in the Advanced Data Formatting
Parsed Driver's License
Driver's License Set Up (DS4801-DL)
9-4.
Send Keystroke (Control Characters and
Quit Entering Driver's License Rule
for a sample ADF rule using this code
9 - 3
to save the rule.
9-4.