Enable/Disable Micr E13B - Motorola DS4800 Series Product Reference Manual

Enable/Disable MICR E13B

Parameter # 682
To enable or disable MICR E13B, scan one of the following bar codes.
MICR E 13B uses the following characters:
TOAD characters (Transit, On Us, Amount, and Dash) output as the following representative characters:
outputs as
t
outputs as
a
outputs as
o
outputs as
d
NOTE OCR is not as secure as a bar code. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See
OCR Template on page
NOTE All OCR fonts are disabled by default. Enabling OCR can slow bar code decoding. Enabling more than
one OCR font could also slow OCR decoding and impact OCR decoding accuracy.
Enable MICR E13B
(1)
8-15.
OCR Programming
OCR Subset on page 8-13
*Disable MICR E13B
(0)
8 - 9
and