DS4208 Quick Start Guide STEP 1 - ATTACH CABLE TO SCANNER http://www.motorola.com/ds4208 Attach Cable Remove Cable (to change interface) See Product Reference Guide for detailed information Note: An audible click sounds when the shielded cable is inserted correctly. STEP 2 -CONNECT CABLE TO A HOST NOTE: Cables may vary depending on configuration.
Motorola reserves the right to make changes to any product to improve reliability, function, or design. This device is approved under Motorola, Inc. (“Motorola”). Motorola does not assume any product liability arising out of, or in connection with, the application or use of any This guide applies to Model Number: DS4208.