Parameters - Motorola DS4800 Series Product Reference Manual

7 - 4 DS4800 Series Corded Digital Imager Product Reference Guide

Parameters

This section describes the parameters controlling the IDC firmware and provides programming bar codes for
setting them.
To set parameters requiring a range of values, scan the parameter bar code followed by two, three, or four bar
codes from Appendix G, Numeric Bar Codes
for parameters with a maximum value of less than 100, for example,
Time requires scanning three digits since the maximum value is 200. Leading zeros are required.
Alternatively, use the sample application to set parameters using the parameter name. The application
provides prompts and error checking to assist in setting the parameters correctly and easily. You must use an
application to set a parameter to a negative value, as the
Intelligent Document Capture (IDC) Parameter Defaults
Table 7-1
Parameter
Intelligent Document Capture (IDC)
IDC Operating Mode
IDC Symbology
IDC X Coordinate
IDC Y Coordinate
IDC Width
IDC Height
IDC Aspect
IDC File Format Selector
IDC Bits Per Pixel
IDC JPEG Quality
IDC Find Box Outline
IDC Minimum Text Length
IDC Maximum Text Length
IDC Captured Image Brighten
IDC Captured Image Sharpen
IDC Border Type
IDC Delay Time
IDC Zoom Limit
IDC Maximum Rotation
corresponding to the desired value. Scan two numeric bar codes
IDC X Coordinate
Parameter Name
DocCap_MODE
DocCap_SYMBOLOGY
DocCap_X
DocCap_Y
DocCap_WIDTH
DocCap_HEIGHT
DocCap_ASPECT
DocCap_FMT
DocCap_BPP
DocCap_JPEG_Qual
Sig_FINDBOX
DocCap_MIN_TEXT
DocCap_MAX_TEXT
Sig_BRIGHTEN
Sig_SHARPEN
DocCap_BORDER
DocCap_DELAY
Sig_MIN_PERCENT
Sig_MAX_ROT
IDC Minimum Text Length.
can require.
Parameter
Default
Number
594 Off
655 001
596 -151
597 -050
598 0300
599 0050
595 000
601 JPEG
602 8 BPP
603 065
727 Disable
656 00
657 00
654 Enable
658 Enable
829 None
830 000
651 000
652 00
IDC Delay
Page
Number
7-5
7-6
7-7
7-7
7-8
7-8
7-9
7-9
7-10
7-10
7-11
7-11
7-12
7-12
7-13
7-14
7-15
7-15
7-16