7 - 12 DS4800 Series Corded Digital Imager Product Reference Guide
IDC Maximum Text Length
Parameter Name: DocCap_MAX_TEXT
Parameter # 657
Specify the maximum number of characters encoded in a bar code for the IDC firmware to use it as an
anchored or linked bar code. Set this to zero (the default) to disable all checking and use all bar codes.
Scan the bar code below, followed by two bar codes from
55 decimal. The default is 00.
IDC Captured Image Brighten
Parameter Name: Sig_BRIGHTEN
Parameter # 654
Enable Captured Image Brighten to make image brightness uniform and enhance contrast such that a large
percent of the background pixels is made completely white (a smaller percentage of pixels is made completely
black if the program determines there is no danger of enhancing the contrast of a very bland area).
NOTE This parameter is also used for Signature Capture.
Disable Captured Image Brighten
(0)
Appendix G, Numeric Bar Codes
IDC Maximum Text Length
*
Enable Captured Image Brighten
(1)
in the range of 00 to