Idc X Coordinate; Idc Y Coordinate - Motorola DS4800 Series Product Reference Manual

IDC X Coordinate

Parameter Name: DocCap_X
Parameter # 596
Specify the horizontal offset to the top left corner of the region to capture relative to the center of the bar code.
Negative values move toward the left. This parameter only applies when
Anchored.
Scan the bar code below, followed by four bar codes from
+/- 1279. The default is -151. Note that you must use an application to set a negative value.
IDC X Coordinate

IDC Y Coordinate

Parameter Name: DocCap_Y
Parameter # 597
Specify the vertical offset to the top left corner of the region to capture relative to the center of the bar code.
Negative values move toward the top. This parameter only applies when
Anchored.
Scan the bar code below, followed by four bar codes from
+/- 1023. The default is -050. Note that you must use an application to set a negative value.
Intelligent Document Capture
IDC Operating Mode
Appendix G, Numeric Bar Codes
IDC Operating Mode
Appendix G, Numeric Bar Codes
IDC Y Coordinate
7 - 7
is set to
in the range of
is set to
in the range of