Page of 2
   

Advertisement

DS4208
Quick Start Guide
http://www.motorolasolutions.com/ds4208
See Product Reference Guide for detailed information
USB
Important: Out of box, RS-232 and USB interfaces require no bar code scan setup. Bar codes are provided for complex programming or interface changes.
Scan
ONE
of the bar codes below
IBM HAND-HELD USB
HID KEYBOARD EMULATION
Symbol Native API (SNAPI) without Imaging Interface
To add an ENTER key after scanned data, scan all
1
SCAN OPTIONS
To add a Tab key after scanned data, scan all
1
SCAN SUFFIX
Attach Cable
Note: An audible click sounds when the shielded cable is inserted correctly.
STEP 2 -CONNECT CABLE TO A HOST
NOTE: Cables may vary depending on configuration.
Keyboard Wedge
STEP 3 - SET UP INTERFACE (Scan Host Bar Codes)
Keyboard Wedge
Scan
ONE
of the bar codes below
IBM AT Notebook
IBM PC/AT and IBM PC COMPATIBLE
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
THREE
bar codes below in numerical order.
2
ADD A TAB KEY
THREE
Enter key bar codes above in numerical order then scan all
2
7
STEP 1 - ATTACH CABLE TO SCANNER
RS-232
RS-232
Scan
of the bar codes below
ONE
OPOS/JPOS
STANDARD RS-232
FIVE
3
0
Remove Cable (to change interface)
IBM 46XX
IBM 46XX
Scan
ONE
of the bar codes below
PORT 5B
PORT 9B
3
ENTER
bar codes below in numerical order.
4
0
5
9

Advertisement

   Summary of Contents for Motorola DS4208

  • Page 1

    DS4208 Quick Start Guide STEP 1 - ATTACH CABLE TO SCANNER http://www.motorolasolutions.com/ds4208 Attach Cable Remove Cable (to change interface) See Product Reference Guide for detailed information Note: An audible click sounds when the shielded cable is inserted correctly. STEP 2 -CONNECT CABLE TO A HOST NOTE: Cables may vary depending on configuration.

  • Page 2: Troubleshooting, Beeper Indications

    Motorola reserves the right to make changes to any product to improve reliability, function, or design. Note: This equipment has been tested and found to comply with the Motorola does not assume any product liability arising out of, or in connection with, the application or use of any Tested to comply limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

Comments to this Manuals

Symbols: 0
Latest comments: