Ocr Maximum Characters; Ocr Subset - Motorola DS4800 Series Product Reference Manual

OCR Maximum Characters

Parameter # 690
To select the maximum number of OCR characters (including spaces) per line to decode, scan the following
bar code, then scan a three-digit number between 003 and 100 using the bar codes in
Bar Codes representing the number of OCR characters to decode. Strings of OCR characters greater than the
maximum are ignored. The default is 100.
OCR Maximum Characters

OCR Subset

Parameter # 686
Set an OCR subset to define a custom group of characters in place of a preset font variant. For example, if
scanning only numbers and the letters A, B, and C, create a subset of just these characters to speed decoding.
This applies a designated OCR Subset across all enabled OCR fonts.
To set or modify the OCR font subset, first enable the appropriate OCR font(s). Next, scan the following bar
code, then scan numbers and letters to form the OCR Subset from the alphanumeric keyboard in the
Advanced Data Formatting Guide. Then scan
OCR Subset
To cancel an OCR subset, for OCR-A or OCR-B, scan OCR-A variant
For MICR E13B or US Currency Serial Number, create a subset which includes all allowed characters in that
character set, or scan an option from the
in the Advanced Data Formatting Guide.
End of Message
Default Parameters on page 4-5
OCR Programming 8 - 13
Appendix G, Numeric
, or OCR-B variant
Full ASCII
and re-program the imager.
.
Full ASCII