Haptic Feedback (Vibrate) on Good Decode
Parameter # 613
The imager provides haptic feedback which, when enabled, vibrates the imager for a period of time when a
successful decode occurs.
Scan a bar code below to enable or disable Haptic Feedback (Vibrate) on Good Decode. If enabled, scan the
appropriate bar code for the
which to vibrate the imager.
NOTE If you enable this parameter, in order to best distinguish between haptic feedback indications, either
disable
(Vibrate) on Good Decode
*Disable Haptic Feedback (Vibrate) on Good Decode
(0)
Haptic Feedback (Vibrate) on Good Decode Duration
Haptic Feedback (Vibrate) on Trigger Touch on page 4-16
Duration.
User Preferences & Miscellaneous Options 4 - 13
or set a longer
Enable Haptic Feedback (Vibrate) on Good Decode
(1)
to set the period of time in
Haptic Feedback