12 - 4 DS4800 Series Corded Digital Imager Product Reference Guide
Troubleshooting (Continued)
Table 12-1
Problem
Imager emits low/high beeps
during programming.
Imager emits low/high/low/high
beeps during programming.
Imager emits a power-up beep
after changing USB host type.
NOTE If after performing these checks the imager still experiences problems, contact the distributor or call
Motorola Solutions support. See
Possible Causes
Input error or Cancel bar code was
scanned.
Out of ADF parameter storage
space.
The USB bus re-established power
to the imager.
page xvii
for the telephone numbers.
Possible Solutions
Scan the correct numeric bar codes
within range for the parameter
programmed.
Erase all rules and re-program with
shorter rules.
Normal when changing USB host
type.