Chapter 3 Usb Interface; Introduction - Motorola DS4800 Series Product Reference Manual

CHAPTER 3 USB INTERFACE

Introduction

This chapter describes how to set up the imager with a USB host. The imager connects directly to a USB host,
or a powered USB hub, which powers it. No additional power supply is required.
Throughout the programming bar code menus, asterisks (
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
*
Enable Keypad Emulation
*
Indicates Default
*
) indicate default values.
Feature/Option