7 - 8
DS4800 Series Corded Digital Imager Product Reference Guide
IDC Width
Parameter Name: DocCap_WIDTH
Parameter # 598
Specify the width of the region to capture. This parameter only applies when
Anchored.
Scan the bar code below, followed by four bar codes from
0000 to 1279. The default is 0300.
IDC Width
IDC Height
Parameter Name: DocCap_HEIGHT
Parameter # 599
Specify the height of the region to capture. This parameter only applies when
Anchored.
Scan the bar code below, followed by four bar codes from
0000 to 1279. The default is 0050.
IDC Operating Mode
Appendix G, Numeric Bar Codes
IDC Operating Mode
Appendix G, Numeric Bar Codes
IDC Height
is set to
in the range of
is set to
in the range of