Ocr Maximum Characters; Ocr Security Level - Motorola DS3578 Product Reference Manual

12 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide

OCR Maximum Characters

Parameter # F1h B2h
To select the maximum number of OCR characters (including spaces) per line to decode, scan the following bar
code, then scan a three-digit number between 003 and 100 using the numeric keypad in
Data Formatting represents the number of OCR characters to decode. Strings of OCR characters greater than the
maximum are ignored. The default is 100.
OCR Maximum Characters

OCR Security Level

Parameter # F1h 2Ah
To select the OCR decoding security/confidence level, scan the following bar code, then scan a two-digit number
using the numeric keypad in
numbers minimize OCR decoding errors but reduce performance. Setting a value that is too high can result in
failure to decode. Setting a value that is too low can cause decoding errors. The range of the security level is 10 -
90 and the default is 80.
Chapter 14, Advanced Data Formatting
Chapter 14, Advanced
represents the level of confidence. Greater
OCR Security Level