Scanning Sequence Examples; Errors While Scanning; User Preferences/Miscellaneous Options Parameter Defaults - Motorola symbol ds9808 Reference Manual

4 - 2 Symbol DS9808 Product Reference Guide

Scanning Sequence Examples

In most cases, scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan
the High Frequency (beeper tone) bar code listed under
fast warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters, such as Serial Response Time-Out or Data Transmission Formats, require scanning several
bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

User Preferences/Miscellaneous Options Parameter Defaults

Table 4-1 lists defaults for user preferences parameters. To change the default values, scan the appropriate bar
codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
NOTE See
miscellaneous default parameters.
User Preferences Parameter Defaults
Table 4-1
User Preferences
Set Default Parameter
Parameter Bar Code Scanning
Beep After Good Decode
Beeper Tone
Beeper Volume
Beeper Duration
Hands-Free Mode
Presentation Performance Mode
Time Delay to Presentation Idle Mode
Time Delay to Presentation Sleep Mode
Low Power Mode
Time Delay to Low Power Mode
Hand-Held Trigger Mode
Set Default Parameter on page
Appendix A, Standard Default Parameters
Parameter
Beeper Tone on page
4-4.
for all user preferences, hosts, symbologies, and
Parameter
Default
Number
Set Defaults
ECh Enable
38h Enable
91h Medium
8Ch High
F1 74h Medium
F1h 76h Enable
F1 8Ah Standard
F1 97h 1 Minute
F1 96h 1 Hour
80h Disable
92h 1 Hour
8Ah Auto Aim
4-6. The digital scanner issues a
Page
Number
4-4
4-5
4-5
4-6
4-7
4-8
4-9
4-9
4-11
4-13
4-15
4-16
4-18