Auto Cutter Specifications; Micr Specifications - Star HSP7000 SERIES Hardware Manual

(6) Font configuration:
(7) Print width:
(8) Print columns:
(9) Paper feed method:
(10) Paper feed speed:
(11) Ink ribbon:
(12) Paper specifications:

10-2. Auto Cutter Specifications

(1) Cutting Modes
(2) Cutting Duty
(3) Thickness of paper

10-3. MICR Specifications

(1) Read width:
(2) Read characters:
(3) Read rate:
(4) MICR character non-scannable area:
* The HSP7543 (no MICR scanning head) does not have a MICR character scanning func-
tion; therefore, the above specifications do not apply.
○ ESC/POS mode
(1-byte)
Alphanumeric (ANK)
Expanded graphics
International characters
(2-byte)
Kanji (JIS level 1)
Kanji (JIS level 2)
Special symbols
7 (half dot) × 9 or 5 × 9
85.4 mm
60 columns (7 × 9 font)
45 columns (5 × 9 font)
Friction feed
Feed pitch min. 0.176 mm (1/144 inch)
max. 141 mm/sec.
Type Cartridge cassette
Color Black
Material Nylon #40 denier
See "5-2. Slip Paper" in "5. Consumable Parts and AC
Adapter" for details.
Partial cut (leaves one uncut portion in center of paper)
Min. 3 seconds/cut
0.065 ~ 0.085 mm
8.1 mm
ISO 1004: E-13B/CMC-7
98% or more
S A M P L E
– 50 –
95 characters
128 characters × 9 pages
37 characters
3,489 characters
3,390 characters
83 characters
1 0 0
40mm
Blank area