Power Specs - Star HSP7000 SERIES Hardware Manual

10-6. Power Specs

10-6-1. Standard Mode (option: PS60A-24B)
(1) Operating voltage: DC24V ± 10%
(2) Thermal printer current consumption (DC24V, room temperature)
Standby
ASCII printing
100% duty printing (solid)
(Solid printing)
Note: Continuous solid printing should be 10 seconds or less.
(3) Slip printer current consumption (DC24V, room temperature)
Operating
ASCII printing
100% duty printing (solid)
(Solid printing)
MICR scanning
Note: Continuous solid printing should be 60 seconds or less.
10-6-2. Low Power Consumption Mode
(1) Operating voltage: DC24V ± 10%
(2) Thermal printer current consumption (DC24V, room temperature)
ASCII printing
100% duty printing (solid)
(Solid printing)
(3) Slip printer current consumption (DC24V, room temperature)
Operating
ASCII printing
100% duty printing (solid)
(Solid printing)
Note: When turning the power OFF and then ON again, there is a risk of a large surge cur-
rent flowing into the unit. Therefore, after turning the power OFF, wait a minimum
of 3 seconds before turning it back ON.
Approx. 0.25A
Approx. average 2.0A
Approx. peak 0.8A
Approx. average 5.0A
Approx. average 1.4A
Approx. peak 5.0A
Approx. average 3.0A
Approx. average 0.7A
Approx. average 1.2A
Approx. peak 5.0A
Approx. average 3.1A
Approx. average 1.4A
Approx. peak 3.0A
Approx. average 1.7A
– 53 –