1-3. Removing the protective materials
Four protective materials are inserted into the printer to protect components during shipping.
Before using the printer, be sure to remove all protective materials as shown in the illustra-
tion.
(1) Remove the three tapes and pull the two protective sheets.
(2) Open the front cover.
Remove the tape on the front cover, and then remove the sheet.
Next, pull the protective sheet that is securing the head straight out of the unit.
Front cover
Note: That it is a good idea to keep all protective materials in case you will need to pack
the printer up again and send it somewhere at a later date.
1
2
2
1
– 3 –