Rs-232C Interface Model - Star HSP7000 SERIES Hardware Manual

11-2. RS-232C Interface Model

ON
OFF
No. 1 2 3 4 5 6 7 8
Switch
1-1 Emulation
1-2 STAR line mode
ESC/POS mode
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions
(conditions for BUSY)
1-7 ASB Function *1)
1-8 Should not be changed (Should be set to on)
1-9 Low-power consumption mode
1-10 Validation status in standby condition printing
*1) ASB Function
When this function is enabled, status information is automatically sent to the host whenever the printer status changes
(such as when the cover is opened, paper runs out, or an error occurs). For information about automatic status infor-
mation transmission, refer to the separate Programmer's Manual (Star Line Mode and ESC/POS Mode).
Switch
2-1
2-2
2-3
2-4
The factory settings of DIP switch are all on.
9 10
DIP-SW 1
Function
Reserved
Resolution correc-
tion
Function
Always ON
ON
OFF
No. 1 2 3 4
DIP-SW 2
DIP-SW 1
STAR line mode
Always ON
203 dpi
Invalid
Offline or receive
buffer full
Invalid
Invalid
Opening the platen
DIP-SW 2
– 59 –
ON
ESC/POS mode
180 dpi
Valid
Receive buffer full
Valid
Valid
Closing the platen
ON
Should be set to on
OFF
OFF