Consumable Parts And Ac Adapter; Thermal Paper Roll - Star HSP7000 SERIES Hardware Manual

5. Consumable Parts and AC Adapter

Use paper that meets the specifications.

5-1. Thermal Paper Roll

5-1-1. Paper roll specification
(1) Thickness:
(2) Width:
(3) Outer roll diameter:
Take up paper roll width: 80
(4) Core outer/inner diameter:
Paper type
Normal paper:
Label paper:
(5) Printed surface:
CAUTION
1) Do not glue or tape the roll paper and shaft core together.
2) Do not use paper rolls that have the tail end folded.
3) The trailing edge should not be folded.
Normal paper 65~85 µm (excluding Mitsubishi HiTec F5041)
Label paper 65~150 µm (cutter is not supported)
General thermal paper 79.5±0.5 mm (57.5±0.5 mm/75.5±0.5 mm
Label paper
ø83 mm or less
+0.5 mm or (58
-1
holder is used)
Core outer
ø18±1 mm
ø32±1 mm
Outer edge of roll
– 24 –
when the paper roller holder is used)
76.5 ± 0.5 mm
+0.5 mm/76 +0.5
-1 -1
Core inner
ø12±1 mm
ø25.4±1 mm
* Do not use an inner wrapped roll paper.
mm when the paper roller