Control Codes Used For Peripheral Units; Auto Cutter Control; Other Control Codes - Star SP200F SERIES User Manual

6-4. Control Codes Used for Peripheral Units

Control codes
<ESC> <BEL> n1 n2
<BEL>
<FS>
6-5. Auto Cutter Control (SP240 type only)
Control codes
<ESC> "d" "0"
<ESC> "d" <0>
<ESC> "d" "1"
<ESC> "d" <1>

6-6. Other Control Codes

Control codes
<CAN>
<ESC> "@"
<ESC> "e" "0"
<ESC> "e" <0>
<ESC> "e" "1"
<ESC> "e" <1>
<ESC> "f" "0"
<ESC> "f" <0>
<ESC> "f" "1"
<ESC> "f" <1>
Hexadecimal codes Function
1B 07 n1 n2 Adjust drive pulse width for peripheral unit (Default
setting)
07 Deferred drive command "A" for peripheral unit 1
1C Immediate drive command "B" for peripheral unit 1
Hexadecimal codes Function
1B 64 30 Full-cut command to the auto cutter
1B 64 00
1B 64 31 Partial-cut command to the auto cutter
1B 64 01
Hexadecimal codes Function
18 Cancel print data in buffer
1B 40 Initialize printer
1B 65 30 ON LINE/FEED switch valid
1B 65 00 (Default setting)
1B 65 31 ON LINE/FEED switch invalid
1B 65 01
1B 66 30 ON LINE switch valid
1B 66 00 (Default setting)
1B 66 31 ON LINE switch invalid
1B 66 01
– 20 –