Slip Printer; Micr Head - Star HSP7000 SERIES Hardware Manual

9-2. Slip Printer

Cleaning is recommended to be carried out once every six months or one million lines.
9-2-1. Cleaning the Impact Platen
Use a dry, soft cloth to gently wipe off the paper particles that may have accumulated on the
surface.
9-2-2. Cleaning the Rubber Roller
Use a dry, soft cloth to wipe off the dust that may have accumulated on the rubber roller.
Rotate the rubber roller to clean the entire surface.
Rubber roller

9-3. MICR Head

Cleaning is recommended to be carried out using the following procedure once every year or
70,000 passes.
* The HSP7543 (no MICR scanning head) does not have a scanning head; therefore, this
cleaning is unnecessary.
(1) With the rear cover closed, turn the power switch ON while keeping both the FEED button
and RELEASE button depressed.
(2) Insert the cleaning sheet. Cleaning starts.
– 47 –