Installing The Aileron Servos - Black Horse Model Spitfire-EP Instruction Manual Book

Spitfire - EP -
Item code: BH127
I. AILERON.

1.INSTALLING THE AILERON SERVOS.

1) Install the rubber grommets and brass


eyelets onto the aileron servos.
Top side
.
Bottom side
Aileron
Cut the covering
away from the slot.
Instruction Manual
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Aileron.
 2) Using a modeling knife, remove the cov-
ering at possition show below.
Temporary pin to
keep hinge centered.
Remove
covering
5