GLASAIR -
Item code: BH74 .
1. Aluminium landing gear.
2. Wheels
3. Wheel pants.
4. Fuel tank.
5. Plastic - enginemount.
6. Spinner.
7. Plastic parts for landing gear fuselage.
8.Electric wing light tray.
9. Rudder plastic light.
10. Tail gear set.
11. Plastic parts for tail gear.
I. AILERON.
1.INSTALLING THE AILERON SERVOS.
1 1) Install the rubber grommets and brass
eyelets onto the aileron servos.
Flap
4
Aileron
Bottom side.
Cut the covering
away from the slot.
Instruction Manual
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Bottom side.
1 2) Using a modeling knife, remove the cov-
ering at possition show below.
Servo tray
Temporary pin to
keep hinge centered.
Remove
covering
Secure