BLADE -
ITEM CODE: BH70-A.
1. Aluminium landing gear.
2.Wheel pants
6. Wheels.
7. Spinner.
3. Fuel Tank.
8. Plastic - enginemount.
4. Tail gear
5.Electric motor ply of wood (5a,5b).
INSTALLING THE AILERON SERVOS.
1. Install the rubber grommets and brass
eyelets onto the aileron servo.
Bottom side
4
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
INSTRUCTION MANUAL
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Bottom side
2. Using a modeling knife, remove the cov-
ering servo tray.
Bottom side
Remove
covering