SEA FURY - EP
Item code: BH126
I. AILERON.
1.INSTALLING THE AILERON SERVOS.
1) Install the rubber grommets and brass
eyelets onto the aileron servos.
Top side
All manuals and user guides at all-guides.com
.
Bottom side
Aileron
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
Instruction Manual
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
2) Using a modeling knife, remove the cov-
ering at possition show below.
Servo tray.
Servo tray.
Bottom side
Aileron.
Remove
covering
5