L-39 ALBATROS
Item code: BH141
I. AILERON.
1.INSTALLING THE AILERON SERVOS.
1) Install the rubber grommets and brass
eyelets onto the aileron servos.
Top side
Flap
2) Using a modeling knife, remove the cov-
ering at possition show below.
Servo tray.
All manuals and user guides at all-guides.com
.
Aileron
Instruction Manual
Remove
covering
Servo tray.
Secure.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
Electric
wire.
thread
5