Black Horse Model Spitfire-EP Instruction Manual Book page 6

Spitfire - EP -
Item code: BH127
Servo tray.
 3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
 4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
5. Instal servo tray with aileron servo into

the wing as same as picture below.
Secure
Electric wire.
thread
6
.
2x10mm.
Repeat the procedure for the other wing
half.
INSTALLING THE AILERON CONTROL HORN.
Instruction Manual
Secure.
Aileron
control horn
A+B Epoxy
PLUS glue