Table of Contents
Advertisement
Maintenance
Maintenance and Cleaning
This section includes:
•
General Precautions
•
Locating the Serial Number
•
Usage Counters
on page 155
•
Resetting Routine Maintenance Item Life Counters
•
Cleaning the Printer
•
Installing Staples
•
Calibrating the Scanner
•
Moving the Printer
See also:
Safety
on page 11
General Precautions
Warning:
When cleaning your printer do NOT use organic or strong chemical solvents or aerosol
cleaners. Do NOT pour fluids directly into any area. Use supplies and cleaning materials only
directed in this documentation. Keep all cleaning materials out of the reach of children.
Warning:
Internal parts of the printer may be hot. Use caution when doors and covers are open.
Warning:
Do NOT use pressurized air-spray cleaning aids on or in the printer. Some pressurized
air-spray containers contain explosive mixtures and are not suitable for use in electrical
applications. Use of such cleaners can result in a risk of explosion and fire.
Caution:
Do NOT remove the covers or guards that are fastened with screws. You cannot maintain
or service any parts that are behind these covers and guards. Do NOT attempt any maintenance
procedure that is NOT specifically described in the documentation supplied with your printer.
To avoid damaging the printer, keep the following guidelines in mind:
•
Do not place anything on top of the printer.
•
Do not leave the covers and doors open for any length of time, especially in well-lit places. Light
exposure can damage the imaging units.
•
Do not open covers and doors during printing.
•
Do not tilt the printer while in use.
•
Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the printer and
cause the print quality to deteriorate.
•
Make sure any parts removed during cleaning are replaced before you plug in the printer.
154
WorkCentre 6400 Multifunction Printer
User Guide
on page 154
on page 155
on page 156
on page 168
on page 171
on page 173
on page 155
Advertisement
Table of Contents
Troubleshooting
