Startup Screen; Figure 14 Startup Screen; Figure 15 Startup Screens; Figure 16 Starting And Start Successful Screens - Liebert GXT4 User Manual

3.4.1

Startup Screen

When the Liebert GXT4 is starting up, it initiates a self-test and displays the screen shown in
Figure 14 for about 10 seconds.

Figure 14 Startup screen

After about 10 seconds, the LCD shows one of the On screens in Figure 15; the screen shown depends
on whether input power is available.

Figure 15 Startup screens

O/P:
I/P : 230 V 50HZ 0.0A
BATT: 100 % 320 MINS
LOAD:
To turn on the UPS, press either the Up or Down button to select YES and press the Enter button.
The UPS will start up, the LCD will display UPS STARTING and then START SUCCESSFUL after
the UPS is turned On, as shown in Figure 16.

Figure 16 Starting and Start Successful screens

UPS STARTING
O/P:
I/P : 230V 50HZ 0.0A
BATT: 100% 320MINS
LOAD: 0%
® ™
Liebert GXT4
EMERSON
Network Power
TURN ON UPS
YES NO
0V HZ 0.0A
0%
Input Power is Available
0V 0HZ 0.0A
AC NOT AVAILABLE
START ON BATTERY?
YES NO
O/P: 0V 0HZ 0.0A
I/P : 230V 50HZ 0.0A
BATT: 100% 320MINS
LOAD: 0%
Input Power is Not Available
START SUCCESSFUL
O/P: 230V 50HZ 4.6A
I/P : 230V 50HZ 5.0A
BATT: 100% 15MINS
LOAD: 40%
18
Operation and Display Panel