Display Screen Menu - Liebert 300 series Installation, Operaton & Maintenance Manual

3.2 DISPLAY SCREEN MENU

Operating the UPS consists of observing the
indicators on the operator control panel and
making appropriate responses. Further UPS
monitoring and testing can be achieved by
moving through a series of menu selections
present on the display screen. See Figure 3-6.
When input power is first applied to the UPS,
prompting the operator to check the System
Configuration and then to proceed to the Start.
Up screens.
I
History
Figure 3-6. Menu Selection Arrangement
Once start-up is complete and normal conditions
exist, the NORMAL OPERATION default screen
message will be the only screen message
displayed. This assures the operator that power
and that no operator action is necessary.
Additional menu selections are available and
are presented in a circular arrangement. They
are categorized as follows: Alarm Messages,
Meter Functions, Configuration Screens, Alarm
each category, simply press the Down, Up or
Alarm Silence pad as prompted by the icon
present in the lower right hand corner of each
message screen.
Meter